Executing ipconfig from a DOS prompt shows that this is occurring as expected, with an assigned IP of 192.168.2.10.The gateway and dns are set to the IP address of the router, which is 192.168.2.1.Hi, According to Device manager the Microsoft Teredo Tunneling Adaptor is not working. Under Properies, Device status says This device cannot start. Removing and re-installing the device does not solve the problem. If you are working with, well almost anything network intensive these days, like Antivirus or management tools, your Reverse DNS (r DNS) lookups need to be in good shape.Declarations about network topology include the declaration is required for each subnet even if no addresses will be dynamically allocated on that subnet.Some installations have physical networks on which more than one IP subnet operates.If you are on a personal connection, like at home, you can run an anti-virus scan on your device to make sure it is not infected with malware.If you are at an office or shared network, you can ask the network administrator to run a scan across the network looking for misconfigured or infected devices.
In the round of releases in December 2012 and January 2013 (aka CU7) official support for Lync Server 2013 was added, as well dropping the ‘2010’ from the previous name of . The file may contain extra tabs and newlines for formatting purposes. Comments may be placed anywhere within the file (except within quotes). It is parsed by the recursive-descent parser built into dhcpd.This signals the intent to provide a single LPE client for both Lync platforms and not have separate 2010 or 2013 clients with different interfaces.What this all means is that to utilize any Lync Phone Edition devices with Lync Server 2013 the phone firmware may need updated to at least the CU7 release, which is version 4.0.7577.4363 / .4366 / .4372 for different device families.Declarations are used to describe the topology of the network, to describe clients on the network, to provide addresses that can be assigned to clients, or to apply a group of parameters to a group of declarations.